Kiln Furniture Data
IPS Ceramics provides one of the most extensive ranges of cordierite kiln furniture shapes and sizes. Our range includes most sizes of batts, tiles and plates (kiln shelves), as well as: Cover Batts; Tubes and Beams; Props; Fittings; Profile setters; Saggars; T- and Y-Cranks; and Pin Crank Systems.
-
Technical Datasheet - Cordierite Kiln Furniture
Provides the technical information for all versions of Cordierite that we offer, including: General Use; Improved Surface; Fast Firing; Ultra Lightweight; Glaze Resistant; Cordierite for Extruded Tubes; and Cordierite for Glost Cranks.
-
Technical Datasheet - Cast Cordierite Kiln Furniture
Provides the technical information for all versions of Cast Cordierite, including: Standard Quality for Cast Saggars; Enhanced Quality; and Thermal Shock Resistant versions.
-
Technical Datasheet - Machinable Ceramics (including Machinable Cordierite)
Provides the technical information for Machinable Ceramics, including: Machinable Cordierite; Machinable Alumina; and Machinable Glass Ceramic.
-
Kiln Furniture Catalogue
We supply durable, lightweight, thermally superior products which provide high levels of performance, at the same time as offering in-service consistency and significant energy savings from both reduced fuel consumption and minimised waste.
-
User Guide for Cordierite/Mullite Kiln Furniture
This User Guide is intended to support you in getting the best from your kiln furniture by helping you to understand the properties and some of the typical problems encountered in each of the main product groups, and by making recommendations on the best way to use kiln furniture to maximise performance, prevent premature failure and improve longevity.
-
C9 Cement - Instructions for Use
C9 cement is a general purpose refractory cement suitable for use up to 1400C. Supplied as a dry powder, it is simply mixed with water before use. The cement form a strong, permanent bond after drying. Often used for attaching legs or spacers to setters or cranks.
-
W5 Battwash - Instructions for Use
W5 is a tried-and-tested general purpose wash for setter, cranks and batts. It is an alumina based wash that reduces sticking between the ware and kiln furniture, improving production yield and extending the life of setters. W5 can be applied by brush or by spray.